Xtrend Linux Satellietontvanger FTA Free to air met veel mogelijkheden voor hobbyisten, of voor gratis programma's via de satelliet.
Productinformatie:
Xtrend ET-6000 is voorzien van hoogwaardige hardware componenten. Het draait op open source firmware, dus je kunt ervaren en profiteren van verschillende plug-ins wanneer je maar wilt. Met 3 USB-poorten kun je genieten van PVR, MP3, JPEG en software-upgrades en meer.
Specificaties:
Xtrend ET-6000 HD Linux Full HD HDTV USB PVR ready Sat Receiver
- 400 MHz MIPS Processor
- MPEG-2 / H.264 Hardware Decoding
- 1x DVB-S2 Tuner
- STB Board for a special anti-copy technology
- Auto Scalable Screen for TV and Skin
- 1080P@30 full HD
Multimedia Player
Supports Skin Change
Supports Samba
Supports 3D OSD
Supports EPG
Supports Automatic and Manual Service Scan
Supports Multiple LNB control (DiSEqC)
Scalable frame buffer
Main System
CPU: BCM7405
Flash Memory: 128 MB
DDR: 512 MB
Front Panel
Display: 3 LED
Smart Card Slot: 2
USB 2.0: 1
Key: 5 Keys
Rear Panel
Power Switch: 1
Sat-IF input/output: 1xF-type socket / 1xF-type socket
Video output (analogue): 3 x RCA socket (YPbPr) / 1 x RCA(CVBS)
Audio output (analogue): 2 x RCA
Audio output (digital): S/PDIF
USB: 2 x USB 2.0
Ethernet: 10/100BaseT
RS 232: 1
Power
Mains voltage: 950 - 250 /50 - 60 V / Hz
Power consumption (Max./typ. operation/stand-by): 35/20/1 W
RF
RF range: 950-2, 150 MHz
Modulation, FEC, de-multiplexer: DVB-S/S2 standard
Video
Video resolution: CCIR 601 (720*576 lines), 576p, 1080i, 1080p @ 30
Video decodung: WMV9, MPEG-2, MPEG-4 compatible
Aspect ratio: 4:3, 16:9, Letter
Input data rate: 2-45 MSymb/s
S/N: > 53 dB
Audio
Audio decoding: WMA9, AC3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate: 32/4.1 / 48 kHz
S/N: > 65 dB
LNB
LNB supply (horiz./vert.): 14/18: Max. 400mA
Control signal: 22 kHz ToneBurst DiSEqCTM 1.0/1.1/1.2
General
Afmetingen (WxHxD): 260x45x220cm
Gewicht: 2kg
OP = OP
